ford fiesta ghost installer Immobiliser Installation

Guard your precious possessions from car thieves by putting in a ghost immobiliser. Our TASSA-certified system guards against hacking, key cloning and bypassing the vehicle immobiliser.

The system is hidden in your vehicles wiring loom making it totally invisible to anyone who is looking. It operates by creating an e-pin code push sequence by using buttons already on the steering wheel, door cards and centre console.

No circuit cuts

A car is a precious item that takes many years of effort to acquire, so it's understandable why car owners would want to secure their vehicle against theft. But, traditional security systems such as alarms and wheel locks could easily be snatched away or jumped by thieves. A ghost immobiliser, on the other hand is a highly efficient solution that operates in a quiet manner and isn't easily identified by modern thieves.

A Ghost Immobilise immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU by using buttons on the steering wheel, dash and door panels to create an individual pin code that only you can access. The code can be altered at any time and can be as long as 20 digits in length, based on your preference. It also comes with an emergency code you can use in the event of forgetting your PIN.

The ghost immobiliser can also be used to stop a relay box from transferring the car key's signal inside your home, which could open the doors and begin the vehicle. It could even block high-tech methods of stealing your vehicle such as OBD port hacking. The device is small and weatherproof, which means it's hard to spot and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be put in your car without any permanent marks. This is ideal for those who are planning to sell their car in the future. It's also quicker and easier to install than a factory-fitted unit.

The Autowatch Ghost is a groundbreaking next-generation device that prevents theft of cars using contactless technology by connecting to the vehicle's CAN data network and using the existing buttons to create a unique PIN code. It is a devious device that can be set up without cutting any wires, and does not require additional key fobs. It can also be connected to the vehicle's original ECU, preventing thieves from bypassing it by using an additional key or replacing the ECU with the use of a "relay". This system is TASSA certified and is linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are protected against theft.

No scanning by RF

If you have invested a lot of time and money into the customisation of your vehicle, you'll want to safeguard it from theft. Installing an immobiliser is one of the best ways to stop theft. It will stop your vehicle from beginning until you enter a unique code. Using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits in length that is only accessible to you, making sure that only you are able how to install a ghost immobiliser drive your vehicle. You can also create a valet and service mode that allows you temporarily to start your car without entering the PIN code. This will allow your technician to work on your car without you being there. This is a fantastic feature for people who are looking to reduce time and make their life simpler.

A ghost immobiliser is a new generation device that connects to the vehicle's CAN data network and utilizes the buttons on the steering wheel and dashboard to program a unique PIN code. It is designed to blend into, as it does not emit any sound or LED indicators. It can be placed anywhere on your vehicle, without altering the look of the vehicle.

This stealthy system has been approved by TASSA and could lower the cost of insurance. It also comes with a tracking function, which can locate your vehicle even if it's been stolen. This is especially useful if you own a rare, expensive vehicle that you've spent a lot of effort customizing.

The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to remotely start your vehicle if you forget your PIN or are not able to enter the vehicle due to some reason. This feature is ideal for when you have to pick up the kids or go on errands, but don't want the safety of someone else driving your car. This feature is beneficial in the event that you need to bring your car in for repair or service.

The Ghost is unique in that it does not transmit or detect radio frequencies and is therefore undetectable by thieves using RF scanning and code grabbing technologies. It is also able to protect your car against key copying and ECU swapping as well as other the most common methods used to steal cars.

No key cloning

Ghost immobilisers are a fantastic option to protect high-end vehicles. They are designed to stop key cloning. They stop your car from starting unless an additional PIN code is entered in conjunction with the normal key fob. This makes it more difficult for thieves to steal your vehicle, and could discourage them from trying. This is an especially good option if you've invested a lot of time and money personalising your vehicle or own a unique or expensive model.

These immobilisers are connected to the vehicle's CAN data network onboard and are completely hidden, which means that their presence isn't obvious. It is also impossible for a burglar to identify the device using radio frequency scanning or code grabbing technology. This means that a criminal will need to invest a lot more time in order to successfully take your vehicle.

To bypass the system a thief must be aware of the pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as many times as you need to. The pin code is simple for you to remember but mathematically impossible for anyone else to understand. In addition, the engineer will provide you with a backup PIN code that can be used to bypass the pin in case you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any area of your vehicle. It works with all vehicles and is fully customisable to match the look of your car. It is also simple to use and is affordable. You can even transfer the device to a different vehicle if you change cars during the lifetime of ownership, as long as the new vehicle is compatible with the.

The immobiliser on the CAN bus is compatible with a variety of other security features. For example, it can detect damage to your vehicle and warn the owner. It can also stop the engine in the event that the car is damaged. The system will safeguard your vehicle against hacking and key duplicate. It also detects vibrations or contact with the vehicle. In addition, it could warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses an immobiliser that is hidden and connected to the CAN data network of your vehicle which stops thieves from hacking into your car to disable the alarm, turn off the key fob and generate new keys. This technology is a significant improvement over the traditional methods used by thieves in the past to steal your vehicle. The CAN data network also means that your system will not be affected if you disconnect or change your battery.

The autowatch ghost immobiliser bmw x6 ghost installer is the first immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking and replica car theft. It works without LED indications or key fobs, instead using the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that must be entered first before you can drive your car away.

Modern thieves employ diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require a lot of wiring or are incorporated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not identified by diagnostic tools that are professional. It can even be fitted on vehicles with anti-theft equipment.

Another benefit of a Ghost immobiliser is that your vehicle can only be started by someone who has the PIN code and has physical access to your car. This is an advantage over traditional security systems which can be tampered with by simple cable tampering or a screwdriver.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature on a computer or mobile phone. This is a great option if you need to start your car when it's left in a garage or valet parking.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It has the QR fingerprint system to allow individual parts to be identified which will enable the return of stolen components should they be discovered, and can also be turned into a'service mode' that will allow the engine to start when your car is in a garage or with a valet parking service however you have to enter your PIN code to leave the vehicle.