Protect Your Pride And Joy With The Ghost Immobiliser

ghost 2 immobiliser installation Immobiliser will safeguard your valuable property from theft. It's discreet and does not require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then allow your vehicle to start.

Simple PIN Code Change Process

With the growing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a variety of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system can help you locate your vehicle in the event of it being stolen, but it will not prevent the crime. Immobilisers, on the contrary does exactly what is a ghost immobiliser it says on the tin: it shuts down the engine of your vehicle so that it is unable to be started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ghost device is able to create an exclusive sequence that has to be entered before the car's engine will start. This can be done using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This option is particularly useful if you need to give your car away to a valet service or parking because the immobiliser will still be active and not deactivated.

The Ghost is an innovative and unique device that operates with the buttons on your vehicle rather than as a standalone unit. This means that it is not only a highly effective deterrent against vehicle theft but it can also be transferred onto any other vehicles you may own, making it more investment-wise than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is a sophisticated security system that guards your pride and joy against key cloning, hacking and ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be placed in the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it is compatible with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The advantage of using CAN data is that it runs silently compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons on your vehicle like the steering wheel or centre console panels to create a unique, customizable disarm sequence. The sequence can be extended by 20 presses for additional security. The iPhone app is limited to one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The Ghost stops car thieves from adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine can only be started if a valid PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, you can hand your car to a valet or service without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device is able to intercept signals and prevent your car from operating normally until you enter a customized code. The system can be turned on or off through your smartphone's app without the need for additional wires.

Standard factory immobilisers for vehicles function by using a transponder inside the key that transmits a signal to the ECU. If the correct code is transmitted the car will start, but if a transponder is swapped with one from a different vehicle, the immobiliser will not recognise it. This allows the vehicle to be stolen and started. The Ghost immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It shields you from hacking or key cloning, and even key theft. The only way that a burglar could steal your vehicle is physically towing it away, and even then they wouldn't be allowed to drive it.

ghost Immobiliser installation near me makes use of the buttons on your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual PIN sequence that can be changed that needs to be entered before you can drive. It does this without additional hardware, like keys fobs. It can take up to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be disabled or removed by thieves. It's also harder to remove from a car alarm which requires disarming with a button sequence. This makes it an excellent supplement to a GPS tracker which helps locate your car after it has been stolen.

Override of emergency PIN code

You don't have to go far on social media to find stories or even videos of vehicles that have been stolen by car immobiliser ghost thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without the original keys.

The ghost immobiliser fitter immobiliser helps combat this issue and offers an additional layer of security to stop your vehicle from being taken in the event of being targeted by thieves. It creates a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN must be entered together with your original key fob to prevent the vehicle from beginning. The unique override PIN is on the black card that you will receive following your installation and is easy to remember since there are no LED indications.

The device is hidden within the wiring of the vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify what type of security systems you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike other security systems, which rely on a relay in the engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to block a vehicle completely, by sending a digital block to the ECU and engine.

These systems can also be linked to a separate alarm immobiliser or tracker. This should be specified prior to the installation. They are also compatible with valet and service modes, and are is a great alternative to a tracker device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen without the owners keys. It's now more easy than ever to take your joy and pride with the availability of key cloning tools & door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It is completely silent, as it does not use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also stops you from introducing the new ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console & door panels. Before you can start your car, you must enter a unique, changeable PIN code up to 20 digits.

This is the very first aftermarket CAN-bus immobiliser for the market that has been developed. It can prevent your vehicle from being driven or even started when you don't enter a PIN code before entering. If the device is activated and you attempt to drive off it will display an indicator on your dash which will flash continuously for about 300m. If you enter your PIN code during this time, it will disarm the anti-hijack system and your vehicle will continue to drive just as normal. If you don't enter your PIN code at this point, the warning will keep flashing & will require another PIN code for every attempt to start your car.