how to open a saab 93 without a key to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is used by the dealer. A new key and transponder need to be bought and then programmed to the car.

It is a good idea to rotate your keys so that one doesn't get damaged faster than the other. This will help keep your keys in pristine condition.

Replacement Case

In contrast to the traditional saab 9-3 key not accepted contact service (click now) keys of old keys, the latest keys have electronic components which makes it more difficult to make a copy. This has made theft of cars much more complicated than it was 20 years ago. It has also made it more costly to replace keys that were lost.

Every owner of a Saab 9-3 must have at least two working keys. It is costly to replace a lost key, as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers usually charge between $100 and $200 to complete this.

There are several ways to get around these high cost. Some parts dealers will use the code of an extra key to cut a brand new metal blade for less than that of a dealer. The key must be the exact same as the original in order for it to function in your vehicle.

Follow these steps to replace the case. You'll need a flathead screwdriver along with some patience. With the screwdriver, pry off the plastic and then remove the emergency key. Once the case has been opened take the electronics out and put them in the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the battery of the remote fob with just four steps. This tutorial should work with any modern saab replacement keys key fob. However, the process could differ slightly.

The first step is to find the button that lets off the backup key on the fob. It is usually located near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the small hole on this button. This should be enough to open the fob case to allow you to change the battery.

Once you have installed the new battery CR1632, you are able to reassemble your remote key fob. Then, you can program it into your car. The whole process should not take more than an hour. This is a very easy procedure that doesn't require special tools.

The process can be a bit more complex if you lose your key, but it's possible. The dealer must find the VIN number of the car and then order a new key blade and TWICE module that has the proper unique code. After that, they will need to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob has batteries that are used to lock and unlock your car. They have a limited life span and eventually die. This is a typical issue that happens to all cars, and the good news is that you can replace the batteries on most key fobs and not have to replace the whole case. Amazon sells fobs for replacement that already have all the electronic components installed. You can simply open the case and replace the batteries. It's important to note that you'll need take out the emergency key first, and you can accomplish this by inserting the small screwdriver flathead into the slot found in the middle of the case. The screwdriver should be moved around the case, and it should split open, making it simple to remove.

If you're ready to change your keys, be sure to have a spare available. This will save you a significant amount of money. If you do have a spare, you can request that the dealer cut a new key and program it to the car, which is much cheaper than replacing the entire key fob.

If you do not have a spare key car key, you can add an additional key to your car, however this will require a lot of research and effort. Adding a second key costs around a hundred dollars and it requires programming of the car's computer. This can be done by a professional, but it's an expensive option for most owners.

replacement key for saab 93 Ignition

The latest saab 9-3 key fob programming 9-3 is a more sophisticated alarm system based on a key code. If you lose your sole key, it may be costly to get another one, as the car has to include a computer and be programmed to accept a brand new key. Dealers can even charge hundreds of dollars to program a new key if they are unable to complete the task.

If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or saab 9-3 key programming TWICE) to create a replacement, and they will charge top dollar for it. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a replacement key, and save you over 50% of the price you be charged at a dealership.

If you've been a faithful owner of a 03-11 SAAB 9-3, then you probably have noticed that the ignition switch isn't all that durable. They can get extremely sticky and the buttons can be ripped off occasionally It is recommended that you consider purchasing a new one if yours isn't working properly. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done quickly with the appropriate tools.