Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair doors costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. If you have double glazed window repairs near me-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards fall onto the cloth instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair doors the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is large, you may want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll have to open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

upvc windows repairs near me handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with an ease. They can be repaired by any skilled DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler with someone else to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. First, the hinges because of wear and tear, may become displaced, which can cause a gap to form where the sash joins the frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.