Tips For Replacing a Window Handle

Changing your window handle is a simple task that can be completed in the at-home comforts of your home. Use these helpful tips to ensure a smooth operation and great looking finish.

Remove the screw covers from your uPVC handle to expose the screws. Then, measure the length of the spindle to ensure you get the right size replacement double glazing handles.

1. Take a measurement of the Spindle Length

When replacing a window handle, it's important to get the size of the spindle correctly. It can affect the tightness or looseness of the handle as well as whether the handle locks correctly into the frame of the window. The spindle is a metal shaft that connects the handle to the lock inside the frame of the window. The spindle is available in the standard 8mm cross-section for industry or older 9mm versions. Modern industry standards are 8mm, however it wasn't always that way. It is crucial to verify the measurements prior to buying a new handle.

Remove the handle. This is easily done by turning the handle in the open position and unscrewing two screws that keep the handle in place (which are usually hidden behind plastic caps which are required to be removed). After removing the handle, you can measure from the base of the handle until the end of the spindle. This will give you the measurement required to buy a replacement.

There are many choices when it comes to choosing a new window handle, from sleek chrome that blends into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curved monkey tail latches! There are many options, but the most important is to choose one that complements your home's decor.

Espag handles are commonly installed to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles are available in a range of sizes, from 58mm up to 62mm. Window handles from Cadenza come in a different size because they have an angle blade that operates an interlocking mechanism that is multi-point inside the window.

When selecting a window handle, you should also consider the hand you use to open your door. Inline espag handles can be used for left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.

2. Remove the Handle

A window handle that has fallen out can be frustrating, whether the handle is damaged or worn out. The good news is, you can replace the uPVC handle yourself. All you need is the most basic tools and some time to complete the process.

The first step is to have to open the window and make sure that it is in an unlocked position. Then, you need to remove the screw caps holding the handle in position. Once the screw caps are removed then you'll be able remove the handle.

The handle is attached to a spindle within the window frame. This is either fixed by screws or pins, depending on the type of handle. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both types of handles are available on casement windows including aluminum ones. You can lock the handles with a key in order to block access by unauthorised persons from the outside. Or you can lock the handles for bifold doors by turning them clockwise.

To remove the handle, you will need to use a screwdriver with a flat blade to remove the clip that holds the handle. After this is released, the handle will slide off the spindle. After the handle has been removed, you will need to measure the length of the spindle and ensure that your new handle is compatible with this measurement.

Once you have the right size, you can screw the new handle in place. You must ensure that the new handle is securely secured and that it is turning in the correct direction (clockwise for open and counterclockwise for closed). It is essential to ensure that the handle has not been installed upside down.

Replace the screw caps. After you've completed this step, you are able to test the handle to make sure it is working correctly. You can also test the locking system by moving the handle from an unlocked position to the locked position and then back.

3. Remove the Screws

A uPVC window handle is an essential component of every home and is often the first thing to exhibit signs of wear and wear or damage. This could be due to natural elements or by regular use and sometimes even deliberate damage by opportunistic criminals who may seek to open a closed window handle upvc and gain access to your home. But, a simple fix will solve the issue and stop the problem from occurring again.

uPVC handles may also be difficult to remove when the locking mechanisms aren't working correctly. In most cases, the issue is solved by replacing the multipoint lock, rather than the entire handle, and it's certainly worth checking this since it can save you money.

After you have removed the handle, you'll need to remove the screws that were holding it in place. These screws are usually found on the inside of the base of the handle. You may require an screwdriver to do this, and it's essential that you don't over tighten, as this could cause the handle to become loose.

You will then need to locate the fixing pins or screws that hold the new handle in the correct position. These are usually located on the inside of the base of the handle. You'll require an instrument to remove them. After you have removed them, you'll have to replace the screw caps should you choose to do so, and then test the new handle to make sure it's functioning properly.

When you're ready to install the new handle, simply align the spindle with the cutout in the window mechanism and screw it in place. Make sure that the handle is in the open position and that the screws are securely secured prior to replacing the screws' covers, should you wish to do so. You're done! Now you can enjoy the newly installed window handle. We hope this will allow you to save money on window and door replacements in the future. Contact us if you need more information about this or any other aspect of your uPVC window.

4. Fit the New Handle

Whether you're replacing a broken handle or simply changing it the process is simple and can be completed in just a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll require to finish the job are crucial. Always ensure security when working with windows and tools. It's also important to take your time and follow the steps carefully to ensure you have a functioning handle that is safe to use.

To begin, locate the screws that hold the window handle in place. Take them off while firmly gripping the handle to prevent it from falling down and causing injury. Once the screws have been removed, they can be placed in a secure location to be replaced later.

After the handle that was used previously was removed, you can begin to install your new handle. It is essential that the handle fits perfectly to ensure it is functional and secures the window in position. The next step is to slide the square metal bar at the back of the handle into the hole of your window mechanism, ensuring that it is securely in place.

Once your new handle is installed, the final thing to do is replace the caps on the screws and verify that it works. If you're not happy with the results or the window doesn't open and close properly contact our experts for help.

Almost all homes in the UK have upvc door handle replacement windows and as so, a large number of them will require to be replaced at some point due to damage or wear. Anyone with a little DIY experience can easily accomplish the task. It is crucial that the handle you use matches the size and style of your window. Contact us if aren't sure of the kind of handle you need. They will be able assist you with all of the choices.