double glazed repairs Glazing Door Lock repairs to double glazing windows

Are you experiencing issues with your uPVC window or door mechanism faulty? Maybe the window or door handles aren't able to connect properly or are hard to use.

It's important that your double glazing window repair-glazed doors operate smoothly, otherwise you'll lose energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at a reasonable cost.

Snapped Key

If a key is snapped off in a lock, it could be extremely difficult. It also poses an issue for security, since the door might not lock and could leave you vulnerable to burglars. There are fortunately simple fixes you can attempt to fix the issue and get your door operating properly once more.

Be calm. If you panic and begin poking around wildly, you might just end up pushing the damaged piece of the key further into the lock, thereby making the situation much worse.

Spray WD-40, or any other penetrating lubricant, into the lock. This will assist the broken piece to be removed more easily. You can also use a screwdriver to help break up any pieces stuck that might be hindering the flow. If you're fortunate enough to have a small piece of the key that is hanging out and you want to remove it, make use of a paperclip or other thin metal object to grab it and then pull it out. Both of these methods work well, however, be very careful not to push the damaged piece of the key even further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have one of these tools, you can bend a hook using needle-nosed pliers. You can also use a pair of tweezers grab and pull out the last piece of broken keys.

If you are unable to get the broken piece of key out, you can try using a lock de-icer. It's usually available at most hardware stores. It is used to freeze any moisture or ice that might be in the lock.

If none of these tricks are working then it's probably the time to contact a locksmith. Fitlocks experts can quickly solve problems like broken handles and snapped keys using uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them more user-friendly. You can request an appointment online for a double-glazing repair or call us to discuss your needs.

Broken Cylinder

A damaged cylinder can pose a serious security threat. It's fortunately a simple repair double glazed windows for an expert locksmith to complete. A locksmith must tap the cylinder to fix it. This can be done with a hammer, or any other tool. The best method is to make use of a wire or a long match. Then, position the match's tip or wire near the keyway. The locksmith can then strike the lock to break it. This is far better than using a heavy hammer that could cause damage to the lock.

Overheating is the most common reason behind cylinder heads cracking. This can occur when the cylinder head and block are made of various metals, such as cast-iron or aluminium. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand faster than the rest.

Corrosion is another possible cause of fractures in cylinders. If the head and block of the cylinder are not maintained in a timely manner they may rust or corrode, which can cause them to expand faster than expected. This could lead to cracks over time.

If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety reasons. A malfunctioning locking mechanism, misalignment or a worn handle are common causes of this problem.

Fortunately it's a simple and inexpensive fix for most homeowners of double glazing windows repairs glazing. A professional locksmith can usually solve the issue within one hour of arriving at your home. Depending on your needs, they can replace the locking mechanism, replace the window handles, and change the gearboxes. A locksmith with experience will always be able advise you on the most cost-effective options for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that offer an additional layer of protection against burglars. It's a small price to enjoy the peace of mind that comes from knowing your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms that become less effective over time. It can be difficult to determine the reason behind a broken window handle lock and repair it correctly.

Fixing the broken handle, regardless of whether it's the internal latch or the locking mechanism, will improve the security of your uPVC door and reduce the risk of draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could harm the door's frame as well as lock and frame, so it's worth spending some time to do it correctly.

With the window open then loosen the screw that secures the handle using the screwdriver. The screw should be on the inside face of the back plate, normally hidden by an attractive cover for the screw for aesthetic reasons. Be sure to not lose any of the internal components within the handle, like the plates or levers on the opposite side of the spindle. Keep them in the same order to make it easier to replace if necessary.

Then, turn the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle that holds it to the internal spindle using another screwdriver. Once the screw is loose, you should be able to pull the handle off and pull out the broken spindle. Replace it with a brand new spindle, making sure it's the same length (you can buy them on the internet or in hardware stores). Securely screw it into the frame. Do not overtighten the screw as this could harm the handle as well as the window frame.

Check that the new handle is correctly fitted after which you can close and test the handle. It should operate smoothly, and you will be able to open your windows after a few times.

Don't forget to Double Glazed Window Repairs-check that your uPVC window is shut correctly when you're using the handle. If they're not cause draughts and damp in your home as and also affecting the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is especially common in uPVC tilt and turn windows. These types of windows require a handle that is a lock mechanism that is located in the window frame. The handle is attached to a central rod which triggers a set of cams that resemble mushrooms, which locks are inserted into the window frame. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle has been damaged, this can be a frustrating problem.

Luckily there are ways to rectify this issue. A skilled locksmith can quickly and efficiently fix this problem. A good locksmith can disassemble the handle of the window by using a tool that removes the wheel portion where the spindle is located. This is done without damage to the handle or the window frame.

Once the wheel is removed the technician can then inspect the spindle and determine what caused it to break. This involves disassembling the spindle and examining each component part, noting any damage or excessive wear. This process is usually carried out by technicians working in a clean and safe environment.

The next step is to clean the damaged spindle, this helps eliminate any debris or dirt that could be hindering its normal operation. After this the spindle is cleaned, it can be repaired or replaced. If it's being replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes in both pieces of the spindle. This ensures that the new spindle has precisely matched to the handle.

If the spindle that is damaged is beyond repair, it could be necessary to replace it completely. Home centres sell generic replacements but if the style of your window is unique then it is necessary to contact a wood worker or cabinet maker who can replicate the exact component for you. Once the new spindle is installed, it can be attached to the handle by lining up the holes for screws in the handle with the frames existing screws. Once the new handle is firmly installed, you are now ready to operate your uPVC window.