Double Glazing Lock repairs double glazed windows

The use of high-quality locks on your doors and windows can stop burglars from accessing your home. Generally, they don't like breaking glass or slipping through windows that are open.

However, some double-glazing owners have had issues with their door or window lock after it's been installed. Luckily, these problems can be fixed without having to buy new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window lock or door lock if broken or faulty. They can repair hinges, striker plates, and locks for double glazing window repairs-glazing. They can also reposition the cylinder in order to fix any misalignment which could cause your handle to work properly.

If the key fits inside the lock but doesn't turn or is difficult to insert then the mechanism may be stuck. Grease or dirt can get stuck in the mechanism. If this is the case, then it might be possible to clean the lock and lubricate it. It is important to use a dry lubricant, like graphite or teflon, rather than oil, which attracts dirt and stick to the inside of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should get into the mechanism, and the lock should spin smoothly.

Screws that are loose within the lock mechanism are a different reason for a broken lock. They can become loose, fall out, or even break completely, preventing the lock to function properly. A screwdriver can be used to tighten these screws but it is important not to tighten them too much as this can cause damage to the internal components.

A broken lock can be hazardous for you and your family. This is especially the case if you have children. They can easily unlock the door without your knowledge and gain access to your home. If you're concerned that this could occur, a licensed professional locksmith can help you secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always necessary.

Handles that are broken or faulty

A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great choice for those concerned with opportunistic thieves looking to gain entry to your home. It is also a good idea to ask your installer about anti-lift locks that can be installed on top of the locks already in place and ensure that your window is secured in its closed position.

It's not uncommon for handles to be damaged or fail. They are the first part of your window to be forced open by criminals intent on breaking into. Luckily, the good news is that this is among the easiest parts to repair.

Modern uPVC handles and aluminum handles come with a multi-point locking mechanism, referred to as Espagnolette, which is designed repairs to double glazing ward off forced entry. This security upgrade is offered as an option for new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts, again as an optional option on double-glazed window installations.

It is important to repair handles as quickly as possible if it is damaged. Faulty handles may prevent the window from closing properly and permit a draft to enter. It could also be a weakness that thieves who are opportunistic could exploit and put the belongings of your family and your personal belongings at risk.

The process of repairing the malfunctioning mechanism begins by opening the frame of the window and removing the broken handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be sourced which matches the profile of internal window frame mechanism.

Once the mechanism has been replaced, the handle can be re-affixed using the original screws but we would recommend replacing them with more long screws as this will give the most secure fit. The final stage is to apply a coating of clear sealant in order to protect the handle from further corrosion. After that, your window will be operational again and at less than the cost of replacing the entire window.

Hinges that are broken or damaged

If your windows do not close properly, you may experience draughts, an affliction of your home's security and an increased risk of damp or water damage. Window hinges that fail or fail to function properly are a common occurrence and can be fixed easily.

If your uPVC windows don't open or close, it is likely that hinges need to be repaired or replaced. While many window companies require you to purchase a whole new window to fix this simple problem We can replace the faulty hinges and save you money.

Window hinges can be damaged by repeated use or weakened over time by corrosion. If you find a broken hinge, it's important to take steps to prevent further damage by being careful not to push the window open or closed.

Knowing the type of hinge you have will help you find the correct parts to fix it. Maco, Mila and Roto are all window hinges. Consult a professional to avoid buying parts that do not work with your existing hardware. This can cause more damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be a major source of noise and can also allow for water infiltration which can damage your windows.

To fix this issue, first check whether the pin barrel on both sides of the hinge is aligned. If not then tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will help keep the pin in the right position. Ask a friend to hold the doors as you take off hinge screws and hinges. Replace the hinges using those of a matching size and install the screws with glue. When the glue is drying, fix the hinges with weights or clamps.

Once your hinges are repaired after which you will be able to install the door and re-attach the handle. Replace the screws using wood dowels that are the same length as the screw that was used to ensure that they match.

Glass that is damaged or Faulty

uPVC Windows can be damaged over time, despite the fact that they are excellent at keeping out the cold and conserving the heat. This can include broken or damaged glass, as well as defective locks. This is an issue that can be very expensive should it be not addressed. This can also detract from the aesthetics of your home and lead to a loss in insulation. It is important repairs to double glazed windows repair any damage promptly.

You can fix your cracked glass by yourself if your have the appropriate tools and techniques. First, ensure that the area around the glass is free of debris so that any shards don't harm anyone and aren't an accident-prone area. Then, remove all broken glass pieces and dispose of them in the proper manner. Apply masking tape across the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane prior to applying glue is recommended when you have windows that have two panes. This will ensure you have enough room to finish your project.

Before applying the glue, wipe the entire surface of the broken frame and the glass with a a dry, clean cloth. Follow the curing and application directions that may differ from product-to-product. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold delicate materials, based on the angle.

After the adhesive has fully cured, carefully reinstall the glass inside the window frame, making sure that it is flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.

Get in touch with a professional glazier, like O'Brien(r) for an exchange if your glass window is completely shattered. If you leave broken glass unattended, it could pose a safety risk for pet and children, so it's essential to act quickly.