Double Glazing Lock Repairs

Good locks on your windows and doors can stop burglars from gaining entry into your home. In general, they don't enjoy breaking glass or squeezing through windows that are open.

However, some double glazing owners have experienced problems with their door or window lock after it was installed. These issues can be solved without the need for new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or broken or Jerealas has a problem, a locksmith will repair it for you. They can repair the hinges, striker plates and locks on your double glazing. They can also reposition the cylinder to fix any misalignment issues which could cause the handle to not function correctly.

If the key fits into the lock, but it doesn't turn or is difficult to insert the mechanism might be stuck. This could be due to dirt or grime getting stuck in the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating the lock, you should insert the key and then try to turn it. The lubricant should work through the mechanism and the lock should be able turn easily.

Loose screws within the lock mechanism can be another reason for a malfunctioning lock. They can become loose and fall out, or even break off completely, preventing the lock from being able to work properly. The screws can be tightened using a screwdriver, but you must be careful not to over tighten them. This could damage the internal components.

A broken lock can be hazardous for you and your family. This is especially the case if you have children. It is possible for them to unlock the door Jere Alas without your knowledge and give them access to your home. If you're worried that this might occur, a professional locksmith can help secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC doors and windows. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows and doors are not always necessary.

Broken or Faulty Handles

As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great option for those who are concerned about burglars who are opportunistic and trying to gain access to their home. Ask your locksmith about antilift blocks. They can be put in in addition to existing locks and can help keep your windows firmly closed.

Handle locks can be damaged or fail. They are the first part that criminals will use to force open your window. Luckily, the good news is that this is among the easiest parts to repair.

Modern handles made of aluminium and uPVC have a multi-point locking mechanism called Espagnolette that is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. As an optional upgrade, older style uPVC or aluminium handles that are no longer used can be upgraded to a shoot bolt locking system.

It is essential to fix a handle as soon as possible if it is damaged. The damaged handles could stop the window from closing properly and permit drafts to enter. It may also be a weak point that burglars who are opportunistic could exploit, putting your belongings and family at risk of being taken.

To repair the damaged mechanism, you first need to gain access to the window frame and then remove the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that matches the profile of internal window frame mechanisms.

Once the mechanism is replaced the handle can be re-attached with the original screws - however, we generally recommend replacing them with longer ones as this will give a more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further rust. Once you've completed this step, your window should be functional again, and at a fraction of the cost of replacing it.

Hinges that are Broken or Faulty

If your windows do not close properly, draughts could get in, your home's security barriers will become weaker and there's the risk of water damage or damp. Broken or damaged window hinges are a typical problem that can be fixed easily.

If your windows made of uPVC won't open or shut and close, it's likely the hinges require to be repaired or replaced. While a lot of window companies require you to purchase a whole new window unit in order to fix this simple problem We can replace the hinges that are damaged and save you money.

Window hinges can often break due to repeated use or may be weakened by corrosion over time. If you've got a broken window hinge, it's crucial to take the necessary precautions to avoid further damage. This includes not causing the window to open or close.

Knowing the type of hinge you have will help you locate the right parts to repair it. Maco, Mila and Jerealas.Top Roto are all manufacturers of window hinges. Consult a professional to avoid purchasing parts that will not fit into your existing hardware. This can result in more damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be a major source of noise, and can also permit water to infiltrate your windows.

To fix this issue, first check whether the pin barrel on both hinge halves is aligned. If it isn't, tap the headpin with a hammer in order to make a slight bend in the hinge barrel. This will help keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges using those that are the same size and attach the screws using glue. Finally put the hinges in place using clamps or weights while the glue dries.

After you have fixed your hinges, you can put the door jerealas back in place. You can also attach the handle. Replace the screws using wood dowels of the same size as the screw that was used to ensure that they are compatible.

Broken or Faulty Glass

uPVC Windows can be damaged over time, even though they are extremely effective in keeping cold out and keeping warmth. This can include broken or damaged glass as well as faulty locks. If neglected, this could become a very costly issue. It can also affect your home's aesthetics and cause a loss of insulation. It is important to repair any damage immediately.

You can repair your cracked glass yourself if you have the proper tools and techniques. First, ensure that the area around the glass is clear so that any shards won't harm anyone and aren't a trip hazard. Next, remove any broken pieces and dispose of them appropriately. Then, place masking tape over the entire area to stop pieces of glass from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before applying glue is an ideal option in the case of windows that have two panes. This will ensure you have enough space to complete your project.

Before applying the glue, wipe the entire surface of the broken frame and the glass with a dry, clean cloth. Follow the directions for application and curing times which may differ from one product to the next. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold fragile materials, depending on the angle.

When the adhesive has completely set, jerealas.Top carefully place the glass in the window frame, ensuring that it is flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Avoid bending the glass as you install it again because this could weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that's completely shattered or has larger cracks, contact a professional glazier such as O'Brien(r) to organise a replacement. It's crucial to act fast if you have broken glass.